5.Move the glasses within 10 feet (3 m) of the projector, then hold down the Pairing button on the glasses for at least three seconds.
The status light on the glasses flashes green and red. If pairing is successful, the light turns green for 10 seconds and then turns off.
Parent topic: Viewing 3D Images
Charging the 3D Glasses
Charge the glasses when the status light on the glasses flashes red to indicate a low battery. 1. Connect the smaller end of the charging cable to the port on the bridge of the glasses.
Note: Make sure you connect the cable in the correct orientation or you may damage the glasses or cable.
2.Connect the other end of the cable to the USB Type A port on the projector. Note: The projector must be turned on to charge the glasses.
51
