Event ID code | Cause and solution | |
0484 | Communication with computer was disconnected. Restart the EasyMP Network | |
| Projection program. | |
0483 | The EasyMP Network Projection program quit unexpectedly. Check the network | |
| communication status, then turn the projector off and then on again. | |
04FE | ||
| ||
0479 | A projector system error has occurred. Turn the projector off and then on again. | |
04FF |
| |
0891 | Cannot find an access point with the same SSID. Set your computer, access point, | |
| and projector to the same SSID. | |
0892 | The WPA/WPA2 authentication type does not match. Make sure the wireless | |
| network security settings are correct. | |
0894 | Communication with unauthorized access point was disconnected. Contact your | |
| network administrator. | |
0898 | Failed to acquire DHCP address. Make sure the DHCP server is operating correctly. | |
| If you are not using DHCP, turn off the DHCP setting in the Network menus. | |
0899 | A communication error has occurred. Try restarting the EasyMP Network Projection | |
| program and restarting your projector. If that does not solve the problem, contact | |
| Epson for help. |
Parent topic: Projector Information Display - Info Menu
Projector Reset Options - Reset Menu
You can reset most of the projector settings to their default values using the Reset All option on the Reset menu.
You can also reset the projector's lamp usage timer to zero when you replace the lamp using the Reset Lamp Hours option.
90
