•If you adjusted the projector height using the projector feet, press the keystone buttons on the projector to adjust the image shape.
•Turn on automatic keystone adjustments using the projector's menus.
•Adjust the position of the projector's horizontal keystone slider.
Parent topic: Solving Image or Sound Problems
Related references
Projector Feature Settings - Settings Menu
Related tasks
Correcting Image Shape with the Keystone Buttons
Correcting Image Shape with the Horizontal Keystone Slider
Solutions When the Image Contains Noise or Static
If the projected image seems to contain electronic interference (noise) or static, try the following solutions:
•Check the cables connecting your computer or video source to the projector. They should be:
•Separated from the power cord to prevent interference
•Securely connected at both ends
•Not connected to an extension cable
•No longer than 10 feet (3 m)
•Check the settings on the projector's Signal menu to make sure they match the video source.
•Select a computer video resolution and refresh rate that are compatible with the projector.
•If you adjusted the image shape using the projector controls, try decreasing the Sharpness setting to improve image quality.
•If you connected an extension power cable, try projecting without it to see if it caused interference in the signal.
Parent topic: Solving Image or Sound Problems
Related references
Input Signal Settings - Signal Menu
Supported Video Display Formats
Image Quality Settings - Image Menu
112
