Replacing Consumables 125
Warning:
Wait until the lamps have cooled down sufficiently before removing the lamp cover. If
the lamp is still hot, burns or other injuries may result. It takes about one hour after
the power has been turned off for the lamp to be cool enough.
Caution:
•Never use the projector unless there are t wo lamps installed.
•We recommend replacing both lamps together to maintain consistent hue and
brightness of projected images.
Procedure
APress the [t] power button on the remote control or the
back of the projector to turn off the projector's power. After
the confirmation buzzer beeps twice, disconnect the power
cable.
BWait until the lamps have cooled down sufficiently before
removing the lamp cover on the back of the projector.
Pinch the tabs on the front of the lamp cover together to release the
lock. When the lock releases, pull the cover straight out.
CPull up the lock lever for the lamp you want to replace and
pull the lamp straight out.
If the lamp is cracked, replace it with a new lamp, or co ntact Epson.
sp.116
1Lamp 1
2Lamp 2