List of Functions 83
Wireless LAN Menu (only when the optional Wireless 802.11a/b/g Module is installed)
Sub Menu Function
Wireless LAN Power Set to Off to deactivate the Wireless 802.11a/b/g Module connected to the projector. When set to Off, the Wireless 802.11a/b/g
Module is treated as if it were not connected.
Connection mode When the projector is connected to a computer with EasyMP Network Projection, set so that it is in a permanentl y connected mode.
Wi-Fi Protected Setup When using a WPS (Wi-Fi Protected Setup) compatible access point via a wireless LAN, you can easily connect the projector to the
access point and make security settings. sp.133
Antenna level Displays the wireless LAN wave strength.
Wireless LAN system Sets the wireless LAN system.
SSID Enter an SSID. When an SSID is provided for the wireless LAN system in which the projector participates, enter the SSID.
You can enter up to 32 single-byte alphanumeric characters.
DHCP You can set whether or not (On/Off) to use DHCPg.
If this is set to On you cannot set any more addresses.
IP Address You can input the IP addressg assigned to the projector.
You can input a number from 0 to 255 in each field of the address. However, the following IP addresses cannot be used. 0.0.0.0,
127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a number from 0 to 255)