Replacing Consumables 126
DInstall the new lamp.
Insert the new lamp along the guide rail in the correct direction so
that it fits in place, push down firmly until it is fully inserted, and
pull down the lock lever until it clicks into place.
EReinstall the lamp cover.
Press the cover against the unit and slide it to the right un til it clicks.
Caution:
•Make sure you install the lamp securely. If the lamp cover is removed, the lamp
turns off automatically as a safety precaution. If the lamp or the lamp cover is not
installed correctly, the lamp does not turn on.
• The lamp(s) in this product contain mercury. Please consult your state and local
regulations regarding disposal or recycling. Do not put in the trash.

Resetting the Lamp Hours

The projector records lamp life and a message and indicator notify you
when it is time to replace the lamp. After replacing the lam ps and turning
on the power, the following message is displayed on the screen and you
can reset the lamp-hour counter.