Functions for Enhancing Projection 49
Changing the Aspect for computer images
You can change the aspect of projected images input from the Computer, DVI-D, or HDMI input port as follows. The default aspect ratio is 16:10 because
of the wide panel mounted on the projector. When projecting onto 16:9 screens, set the Aspect to 16:9.
If parts of the image are missing or the image is not projected properly, set Wide or Normal in Resolution from the configuration menu depending on the
size of the computer screen.
Set Values Operation Projection example
Normal
(When the input source is
a Computer, DVI-D, or
BNC)
Projects to the full projection size
retaining the Aspect of the input
image.
When a 1024x768 signal is input
Auto
(Only available when the
input source is HDMI)
Projects in an appropriate aspect
based on information from the signal
being input.
16:9 Projects to the full projection size at
an Aspect of 16:9.
When a 1024x768 signal is input.