Top Mount | Bottom Mount |
Figure 24 - Control Unit Mounting Bracket Installation
SPEAKER D2LS1F
The speaker kit includes the speaker, mounting bracket and connecting cable. Mount the speaker so it is directed to the operator but does not present a hazard in the event of an accident. The speaker may be mounted on the lower edge of the instrument panel, the firewall or above the windshield in some trucks.
1.Use the mounting bracket as a template for locating the mounting holes and mount the speaker as shown in Figure 25.
2.Refer to the applicable installation procedures for connection of the speaker to the accessory cable.
MICROPHONE HANGER AND/OR HOOKSWITCH MOUNTING
The microphone hanger or hookswitch should be mounted in a location convenient to the operator where it will not interfere with the safe operation of the vehicle or be a hazard to the vehicle passengers. The hanger or hookswitch is designed to be mounted with the open end of the mounting button slot pointed upward. Use the hanger or hookswitch as a template to mark and drill the mounting holes. Mount the hanger or hookswitch with the
26
