PROCEDURE -- REMOTE MOUNT
The Radio and Control Units must be programmed in a sequential procedure, in order to provide each Control Unit with the proper identification code.
1.Configure the ORION Remote Mount Radio and Auxiliary Control Unit with the PC Programming Assembly, as shown in Figure 32, Step 1. Program the radio with the following files:
Personality name | <USERPERS> | User’s personality file |
Radio Code | OGXXXXX | Latest radio code file |
|
| (G13 or later vintage) |
ADI Code | <SAME> |
|
Radio Unit ID | <SAME> |
|
ORION Keypad File | <CUBMAP> | Keypad definition for |
|
| Control Unit B |
ORION CU ID | CU B | Must be Control Unit B |
2.Now configure the Remote Mount Radio, the Main Control Unit, and the Auxiliary Control Unit together with the PC Programming
Assembly, as shown in Figure | 32, Step 2. Program this | |
configuration with the following files: |
| |
Personality Name | <USERPERS> | User’s personality file |
Radio Code | <SAME> |
|
ADI Code | <SAME> |
|
Radio ID | <SAME> |
|
ORION Keypad File | <CUAMAP> | Keypad definition for |
|
| Control Unit A |
ORION CU ID | CU A | Must be Control Unit A |
Note that the Main Control Unit has ID “A” and Auxiliary Control Unit has ID “B” in this configuration.
36
