Ericsson 38901E installation manual Equipment Required

EQUIPMENT REQUIRED

The equipment required for installing the Orion Mobile Radio is listed below:

∙Crimping Tool for fuse holder

∙Electric drill for drilling mounting holes

∙Drills and circle cutters as follows:

No. 31 (1/8-inch) drill

No. 27 (9/64-inch) drill

5/8-inch drill or circle cutter

3/4-inch circle cutter, hole saw or socket punch

∙Phillips and flat-blade screwdrivers

∙POZIDRIV driver

∙No. 20 Torx driver

Torx is a registered trademark of CAMCAR Division TEXTRON, Inc. POZIDRIV is a registered trademark of Phillips International Company.

CAUTION

∙Be careful to avoid damaging some vital part (fuel tank, transmission housing, etc.) of the vehicle when drilling mounting holes. Always check to see how far the mounting screws will extend below the mounting surface before installing.

∙If pilot holes must be drilled, remove all metal shavings from drilling holes before installing screws.

8