10.Recheck all connections and cables. Insert fuse into transmit fuse assembly.
Figure 30 - Handle Assembly In LOCKED Position
DUAL CONTROL UNITS
The Dual Control feature can be configured for either front mount or for remote mount Radio Units. Each configuration provides for a Main Control Unit and an Auxiliary Control Unit. In the front mount configuration, the Main Control Unit is on the Radio Unit itself (see Figure 33), with the Auxiliary Control Unit located in a convenient location. In remote mount configuration the Main Control Unit is typically located in the vehicle cab, with the Auxiliary Control Unit located in a convenient location (see Figure 34).
All Radio Units and Control Units in the Dual Control Unit configuration MUST BE PROGRAMMED prior to final installation. It is recommended that the units be first programmed at a Service Center, then transferred to the user’s installation.
PRE-INSTALLATION PROGRAMMING
PROCEDURE --FRONT MOUNT
The Radio and Control Units must be programmed in a sequential procedure, in order to provide each Control Unit with the proper identification code.
1. Configure the ORION Front | Mount Radio | with the | PC |
Programming Assembly, as shown in Figure 31, | Step 1. Program | ||
the radio with the following files: |
|
|
|
34
