2.Run the Dual Control Cable (19B802554P9) between locations for the Radio Unit and Auxiliary Control Unit. Be sure to locate the P2/P3 connector assembly at the radio unit.

3.After installing the Radio Unit in the normal fashion, connect the dual control cable connector (P3) to the Radio Unit. Tighten the two jackscrews on P3. Next, connect the Remote Control Cable connector (P1) to the Dual Control Cable connector (P2), and tighten jackscrews on P2.

4.After installing the Main Control Unit in the normal fashion, connect the Remote Control Cable (P2) to the Main Control Unit, and tighten jackscrews.

5.After installing the auxiliary control unit in the normal fashion, connect the Dual Control Cable (P1) to the Auxiliary Control Unit, and tighten jackscrews.

6.Connect the accessory cable (19B802554P6) to the Auxiliary Control Unit. Connect either the accessory cable (19B802554P6) or the extended option accessory cable (19B802554P7) to the Main Control Unit, as appropriate.

7.A yellow ignition sense lead is provided on each control cable. If the “Ignition Sense” feature is enabled on the Radio Unit, it is necessary to connect only one of the yellow leads provided, whichever is convenient. Tape back the unused yellow lead. See page 20 for details.

8.Install the speakers in convient locations near each control unit.

9.Install a relay (19A149299P1) from the kits supplied at a location near the leads from each speaker. For mounting use the #8 X 3/4” sheetmetal screw and nutplate supplied with each kit.

10.At a convenient point cut one of the wires in each of the 2-wire speaker cables, spread the leads, and strip the ends. (Crimp a 1/4” tab receptacle to each end.

11.Main Control Unit Speaker: Connect the lead nearest the speaker to Pin 87 of the relay. Connect the lead nearest the connector to Pin 30 of the relay. Connect connector to the accessory cable P2 (Refer to Figure 34).

12.Auxiliary Control Unit Speaker: Connect the lead nearest the speaker to Pin 87A of the relay. Connect the lead nearest the connector to Pin 30 of the relay. Connect the connector to accessory cable P2 (Refer to Figure 34).

40

Page 40
Image 40
Ericsson 38901E installation manual

38901E specifications

The Ericsson 38901E is a powerful and versatile solution in the realm of networking technologies. Designed primarily for mobile communications, this product leverages the latest advancements in telecommunications to enhance both coverage and capacity for users. The 38901E is a key component in the drive towards 5G connectivity, facilitating faster data rates and lower latency, which are essential for today’s demanding applications.

One of the standout features of the Ericsson 38901E is its support for Multi-Standard Radio (MSR) technology. This allows the unit to operate effectively across various generations of mobile networks, including 2G, 3G, 4G, and 5G. By consolidating multiple network technologies into a single, streamlined platform, the 38901E reduces operational complexities and provides an efficient solution for mobile operators looking to optimize their infrastructure.

Additionally, the device integrates advanced techniques like Massive MIMO (Multiple Input Multiple Output) technology, which significantly enhances spectral efficiency and improves the user experience. With the ability to deploy numerous antennas, Massive MIMO helps in overcoming latency issues and improving reliability, which is crucial for applications such as autonomous vehicles and virtual reality.

The Ericsson 38901E is built with cutting-edge energy efficiency in mind. By utilizing smart energy management features, it minimizes power consumption without compromising performance. This commitment to sustainability is increasingly important in the telecommunications industry, as operators strive to meet their environmental goals.

Furthermore, the device is designed for ease of deployment and maintenance. The modular architecture allows for straightforward upgrades and scalability as network demands evolve. This flexibility ensures that operators can adapt to new technologies and increasing user expectations without significant downtime.

In summary, the Ericsson 38901E is a robust solution that embodies the future of mobile communication. With its support for multiple standards, advanced antenna technologies, and commitment to energy efficiency, it provides telecommunications providers with a reliable platform to deliver high-quality network services. As the industry continues to evolve towards more interconnected and high-speed services, the roles played by such devices become increasingly critical in shaping the landscape of mobile communications.