Manuals / Ericsson / Lawn and Garden / Weather Radio

Ericsson 38901E installation manual Mounting Bracket Installation

Models: 38901E

1 48

Download 48 pages 22.48 Kb

Page 28

Figure 26 - Mounting Bracket Installation

Top Mount

Bottom Mount

Figure 26 - Mounting Bracket Installation

6.Connect front mount accessory cable connector P2 to speaker cable connector.

7.Connect power cable to power connector on rear of radio unit and secure with the two captive screws to the radio unit.

8.Connect microphone connector to connector on front panel and secure with captive screw.

NOTE

Do not torque microphone connector screw greater than 2 in-lb. Alternatively, finger tight plus 1/4 turn is acceptable.

9.If there are no other accessory connections, tie back plug P3 to main cable.

10.Recheck all connections before inserting fuse into transmit fuse assembly.

28

Image 28

Ericsson 38901E installation manual Mounting Bracket Installation

Contents

Installation Manual ericssonzOrion Mobile Radio LBI-38901ETABLE OF CONTENTS UNPACKING AND CHECKING EQUIPMENT INTRODUCTIONIMPORTANT NOTICE Hardware Figure 2 - Rear View Of RadiosFigure 3 - Cables PLANNING THE INSTALLATION Table 1 - Orion Mobile Radio Optional AccessoriesOption DescriptionPage EQUIPMENT REQUIRED INSTALLATION IN VEHICLES POWERED INSTALLATIONBY LIQUEFIED LP GAS RUNNING CABLESFigure 7 - Front Mount Extended Option Accessory Models OnlyModels Only Interconnections USA Models OnlyFigure 8 - Front Mount Extended Option Accessory Interconnections EURO Models OnlyModels Only Models OnlyInterconnections EURO Models Only Power Cable Interconnections USA Models OnlyFigure 13 - Power Cable 19B802622P1 USA Only Accessory Cable Front Mount19B802554P1 19B802554, Sh.1, Rev19B802554P11 19B802554, Sh.9, Rev19B802554P2 19B802554, Sh.2, Rev19B802554P12 19B802554, Sh.10, RevRemote Mount 19B802554, Sh.5, Rev19B802554P7 19B802554, Sh.6, RevIgnition Sense All Applications CONTROL UNIT MOUNTING REMOTE APPLICATIONS ONLY Control Cable Remote Mount OnlyFigure 20 - USA Remote Control Cable 19B802554P3 19B802554, Sh.3, Rev19B802554P4 19B802554, Sh.4, Rev19B802554P13 19B802554, Sh.11, Rev19B802554P14 19B802554, Sh.12, RevMICROPHONE HANGER AND/OR HOOKSWITCH MOUNTING SPEAKER D2LS1FFigure 25 - Speaker Mounting RADIO MOUNTING AND FINAL HOOK-UPFront Mount Figure 26 - Mounting Bracket Installation Remote Mount Installation Figure 28 - Cassette Assembly Figure 27 - Remote Mounting Bracket InstallationCassette Mounting EURO ONLY Cassette Assembly Mounting Figure 29 - Cassette Assembly Schematic Diagram 19C852366, Sh.2, Rev.1∙Mobile Data Terminal DUAL CONTROL UNITS PRE-INSTALLATIONPROGRAMMINGPROCEDURE --FRONTMOUNT Figure 30 - Handle Assembly In LOCKED PositionConfiguration PRE-INSTALLATIONPROGRAMMING PROCEDURE --REMOTE MOUNTConfiguration Remote Mount Page Installation Configuration 2.Run the Dual Control Cable 19B802554P9 between locations for the Radio Unit and Auxiliary Control Unit. Be sure to locate the P2/P3 connector assembly at the radio unit Mount Installation Configuration 19B802554, Sh.7, Rev DUAL RADIO UNITS PRE-INSTALLATIONPROGRAMMING PROCEDUREINSTALLATION INSTRUCTIONS FOR FRONT/REMOTE MOUNT DUAL RADIO CONFIGURATION 2.After installing Master Radio Unit mounting hardware, connect the Dual Radio Cable Connector P3 to the Master Radio Unit. Tighten the two jackscrews on P3 Configuration ConfigurationFigure 38 Dual Radio Control Cable 19B802554P10 19B802554, Sh.8, RevEricsson Inc Private Radio SystemsMountain View Road Lynchburg, Virginia