Menus
9.The DIVERT Menu*
If you want to make certain that your incoming calls are taken care of when you are unable to answer them, you can use the Call Divert service of the cellular network to divert (forward) them to another phone number, for example, the number of your answering machine.
The Call Divert service lets you:
●divert calls if you already are engaged in a call – On busy
●divert calls that you do not answer (within normally 30 seconds) – No reply
●divert calls when you have turned off the phone or you are unreachable – Unreach- able
You may use all three call diverts and you may divert the calls to different phone numbers, dependent on the situation.
You may also divert All calls, regardless of whether your phone is turned on or off, or you are unreachable. If turned on, the phone will not ring if a call is received.
If you activate the All calls divert, all other diverts will be cancelled automatically. They will, however, be activated again when you cancel the All calls divert.
To divert:
all calls – All calls*
cal s when you are engaged in a call – On busy*
cal s if you do not answer them – No rep y*
cal s when you are unreachable
–~AllcallsUnreDIVERTchabl(e)*
The first option in the Divert menu is All calls. To choose another divert, scroll with R/L.
Press YES to select the desired divert. In this example we will choose On busy.
To activa the call divert
The first opt on is Activate. Press YES to select
it. ~EnterActivateONBUSYno:
You may now:
a. Enter the phone number where you want your calls to be diverted, including the area code, and then press YES.
b. Enter an international number. Press Rto insert the international character “+”. Then enter the country code, the area code and the phone number. Note that a leading 0 in an area code must be omitted. Finally, press YES.
c. Recall the number from the Phone Book. Press Land then recall the number. Finally, press YES.
If you used the ON busy divert on an earlier occasion and then cancelled it, the phone number to which the calls were diverted will be suggested. To keep the number,Busyjust press YES. Otherwise, erase the number using the CLR key and enter the new number.
There may be a short delay before the network responds. n the meantime, the message Please wait displayed. This is followed by the message On busy Divert ON, together with the phone number.
Incoming alls will now be diverted to this phone number when you are engaged in a call.
As a reminder, the display will inform you about any activated call divert each time you turn the phone on.
To review~On(Active)DIVERTthe statusof the call divert
EN/LZT 126 1298 R1A | 19 |
