Ericsson GH388/GF388 user manual Sending and Receiving TextMessssages SMS, Messages memory

This service may not be available on all networks. In addition, a special subscription may be required to use the service.

The Short Message Service (SMS) of the cellular network allows you to send and receive text messages to your phone. SMS may contain up to 160 characters.

Text messages can be received when the phone is in standby mode, when you are engaged in a call, or when incoming calls are diverted to another phone number.

Advanced Functions

23. Sending and Receiving TextMessssages (SMS)

3. Enter the S rvice centre number and press YES. Press CLR to return to the stand-by display.

Your phone is now ready to send and receive messages, but you are only able to send and receive me sages within your operator’s net.

To read32aRenewaged?message87

					1. Press YES when Read? is in the display.
Messages memory						New Message appears on the display.
					2. Press YES to enter the message.
When you receive SMS, the phone gives a
						You		the first three lines of the message.
message signal–two beeps and the indicator
					3. ScrollRforward through the message with
lamp on the top of the phone rapidly blinks
green. You will also see the text Message						, backward with L. Hold down an arrow
together with Read? (the Mmsymbol appears						key for more than three seconds to get to
on the bottom right corner if you answer NO).						the beginn				g or end of the message. Press
						the numer c key 3 to go three lines forward.
The message is automatically stored in the first
free memory position in the phone. You may					To rep y to a message
read the messages any time you wish (the Mm
symbol remains in the display until you have					After the last					has appeared, the question
					Reply? appears. If the caller wants you to reply,
read the message). The messages memory can
					the last~lastline wly?ll r ad Reply Requested.
hold up to 20 messages.
A message remains in the message memory									ine
							Rep
until you erase it or until you insert a different
SIM card.
					You can now:
To set phone f			r text messaging		● Press Lto scroll backward through the
Before you se d messages, you need to see					message.
					● Press YES to reply to the message.
the Service				address.
					● Press NO if you do not wish reply.
1. Ent the Send Message function through
					If you press NO, the question Erase? appears.
	the(~ServOPTIONSMail menu.)R
		centre			You can now:
					● Press YES to erase the message in your
					phone. You will then automatically come to
					the next message in the message list.
	You will be prompted to set the Service
					● Press NO if you do not wish to erase the
	centre number.
					message. The message will remain in the
2. PressEnterno:SERVCENTYES.
					Messages memory.
					You can press CLR anywhere within the
					message to erase it. When the question
					Erase? appears, press YES.

EN/LZT 126 1298 R1A 41