Press YESEnterPIN.

Enter yourUnlockedPIN and press #.

The card ock is now turned off.

newCHANGEPIN PIN CODE To change the PIN code

Change~ChangePINACCESScodecode￿

Press YESold.

Enter theEntrcurrent PIN and press #.

Enter theRepeatPIN and press #.

Enter the nPINNewPIN again.

The PIN has been changed.

If the message Matching error appears, the new PIN was entered incorrectly.

If the message Wrong PIN appears, followed by Enter Old PIN, the old PIN was entered incorrectly.

If the old PIN is entered incorrectly three times in succession, the SIM card will be blocked. This is indicated by the message Card blocked Unblock? Should this happen, refer to chapter 28. Problems You Can Solve at the end of the manual.

EN/LZT 126 1298 R1A

Menus

HANGE PIN2 CODE

To change the PIN2 code – Change

PIN2~ChangecodePIN2codeACCESS￿

Proceed as described above under CHANGE

PIN CODE.

To lock~Phone(Unlocked)or unlock the Phone – Phone

PHONE LOCK

The pho e lock protects the phone against

unauthorised use of the phone in the event of a

theft. You can r

ad more about it in chapter 4.

Protecti g the SIM Card and the Phone.

The pho

is not activated when you

purchase the phone. You should, however,

activate it as s

on as possible.

lock ACCESSlock￿

The currelockEntersetting Full Lock, Autolock or Unlocked is shown between brackets.

Press~UnlockedPHONELOCKYES. ￿

If necessary, scroll with R/Lto desired option:

Full , Aut lock or Unlocked.

When the desi ed option is displayed, for examp e Autolockcode, press YES to select it.

Enter the security code and press #.

When the phone is delivered, it is programmed with a security code of 0000.

Phone lock is displayed, together with the new setting: Full Lock, Autolock or Unlocked.

25

Page 25
Image 25
Ericsson GH388/GF388 user manual To change the PIN2 code Change, To lock~PhoneUnlockedor unlock the Phone Phone