Advanced Functions

4.Enter the new code. (You only need to enter 40 for code 040, since the phone will add the leading zero automatically.)

To erase or replace a code

If you wish to erase a code or replace a code, press YES when that specific code is shown in the display. The question Erase? appears.

a. To erase the code, press YES.

b.To replace the code, press R, followed by YES. Enter the new code and press YES.

An AI is only displayed once, unless its content has changed. If you wish to have a message repeated, you must first erase the code for that message type and then enter the same code again. The phone will see this as a new code which is being entered and thus display the first message available of that type.

46

EN/LZT 126 1298 R1A

Page 46
Image 46
Ericsson GH388/GF388 user manual To erase or replace a code