Escient EWP-2000 V2 user manual Wireless Network Card and Antenna System

WIRELESS NETWORK CARD AND ANTENNA SYSTEM

The EWP-2000 V2 has a built-in PC Card slot along the upper left edge of the device. This slot contains the wireless LAN adapter and a custom antenna in a snap-type Housing. You can operate the EWP-2000 V2 with the antenna in the snap-on position or in the open position for greater signal strength. To use the antenna in the open position, pull the antenna tip off the retainer snap and try to obtain better wireless connectivity through varying orientations up to near- vertical. Place the antenna in it’s down and locked position whenever possible to prevent breakage.

USING THE WEB INTERFACE

The FireBall Web Interface fills the entire screen of the web pad and displays the familiar FireBall user interface. This is the same interface that appears on your PC web browser when you connect to your FireBall using the built in web server. The only difference is that a special web browser is used on the web pad which allows the full 800x600 screen to display the web interface.

To operate the web interface, hold the web pad in one hand or leave it docked in the docking cradle, remove the stylus from the top right of the web pad and select any of the buttons or controls which appear on screen. More details are provided in the following sections of this manual.

Setting Up The Web Pad

ENTERING TEXT WITH THE ON SCREEN KEYBOARD

Pressing the left most button on the EWP-2000 V2 web pad will show and hide the Windows XPe popup keyboard. When the keyboard is displayed, tap on any character to enter text into the active area on the screen. Press the button again to hide the keyboard.

WINDOWS SYSTEM KEY COMBINATIONS

F1: Help

CTRL+ESC: Open Start men

ALT+TAB: Switch between open programs

ALT+F4: Quit program

F11: Internet Explorer full screen toggle

CALIBRATING THE SCREEN

The touch display for the EWP-2000 V2 is calibrated before shipping. In the event that the calibration has been modified or is unsatisfactory, you may use the PenMount (PM) utility, accessible from the System Tray on the lower right portion of the display, to calibrate the touch interface. You may activate this application with touch input via Stylus or mouse click via a USB mouse. This PenMount utility also offers the Right Mouse Button function.

ADJUSTING THE BACKLIGHT LEVEL

You can adjust the EWP-2000’s LCD touchscreen backlight level by using the 4-way navigation (#7) pad while holding down the Internet button (#11).

•Up: Brighter - will show the brightness indicator bar and adjusts the brightness to 1 tick brighter.

•Down: Darker - will show the brightness indicator bar and adjusts the brightness to 1 tick darker.

•Left: Darkest – will show the brightness indicator bar and adjusts the brightness to the lowest setting – effectively blacking it out.

•Right: Brightest – will show the brightness indicator bar and adjust the brightness to the highest setting.

7

11

PAGE 9

EWP-2000 V2 User’s Manual