Name and Skip Setting of the INPUT Knob
INPUT SETUP
The names of the inputs shown on the display can be changed. You can also set the INPUT knob to skip the input terminals that are not in use.
Example:
When a CD player is connected to the COAX (coaxial) terminal and a DVD player to the OPT (optical) terminal
Select “CD” for COAX.
Select “DVD” for OPT.
Select “*skip” for other terminals.
Then only “CD” or “DVD” will appear on the display when you turn the INPUT knob.
1Press and hold the SETUP button for more than 2 seconds.
The unit enters setup mode, and
If the INPUT knob is set to LINE (1, 2, 3 or 4) or PHONO,
“GainL*>***” will appear instead of
If you leave the unit idle for 10 seconds, the setup mode will be cancelled.
2Repeatedly press the SETUP button to select the input terminal to be changed.
q
q
*:
3Turn the INPUT knob to change the setting.
PHONO, MP3, TV, SAT, CATV, | ENGLISH |
Default name, CD, SACD, DVD, TUNER, MD, |
|
<The default name of the LINE4 terminal depends on the LINE4/PHONO switch.
When the LINE/PHONO switch is set to LINE, the default name is “LINE4”. When the LINE/PHONO switch is set to PHONO, the default name is “PHONO”.
<Skip function will not work at all if you set all the input terminals to “*skip”.
<The name of the i.LINK terminal cannot be changed, as the display always shows model name of the connected device. Only “*skip” is selectable for i.LINK.
4Press and hold the SETUP button for more than 2 seconds (or leave the unit idle for 10 seconds) to exit the setup mode.
<Settings are stored even when power is turned off and the unit is unplugged. If left unplugged for an extended period, the settings may be lost.
15