Dukane 8808 user manual Setting Vertical Edges Vertical Enhancer

6. Using On-Screen Menu

[Video]

Turning On/Off 3 Dimension Separation [3D Y/C Separation]

This function turns on or off the 3 dimensional separation feature.

Off	...............................	Turns off the function.
On	Still	Recommended for a still image.
	Normal	The projector detects and corrects the image automatically.
	Movie	Recommended for a moving image.

TIP: When the image is poor quality, turn on [3D Y/C Separation]. If there is still poor quality, try turning off [Deinterlace] or try turning off [3D Y/C Separation] and select [Normal] in [Deinterlace].

NOTE: This feature is available for NTSC3.58 of Video signal only.

Setting Vertical Edges [Vertical Enhancer]

This function enhances the vertical edges around objects in the image.

NOTE: This function is not available for an RGB, HDTV and Component signal.

Selecting Interlace or Deinterlace [Deinterlace]

This function allows you to select between "Interlace" and "Deinterlace".

Off	...............................	Project the interlaced signal.
On	Still	Select when a still image is displayed. When this option is selected for a moving image, jitter or artifacts
		can be seen.
	Normal	The projector automatically determines a still or moving image to display a clear picture. If selecting
		[Normal] causes excess jitter or artifacts, select [Movie].
	Movie	Select when a moving image is displayed. This will eliminate jitter and artifacts in a moving image. This
		option is available only for SDTV.

78