8. Using Optional Lenses
Replacing with Optional Lens
CAUTION
•Do not give a shock or excessive load to the projector or the lens components as the projector and lens compo- nents contain precision parts.
•When shipping the projector with the optional lens, remove the optional lens before shipping the projector. The lens and the lens shift mechanism may encounter damage caused by improper handling during transportation.
•Before removing or installing the lens, be sure to turn off the projector, wait until the cooling fans stop, and turn off the main power switch.
•Do not touch the lens surface when removing or installing the lens.
•Keep fingerprints, dust or oil off the lens surface. Do not scratch the lens surface.
•Work on a level surface with a soft cloth under it to avoid scratching.
•If you remove and store the lens, attach the lens cap to the projector to keep off dust and dirt.
Remove the existing lens from the projector.
1.Rotate the lens counterclockwise while strongly pushing the LENS RELEASE button all the way in.
The existing lens will be disengaged.
NOTE: If the lens cannot be removed even by using the LENS RELEASE but- ton, the
If such is the case, remove the
2. Pull out the existing lens slowly.
LENS RELEASE
Button
UP
NWOD
RIGHT
TFEL
Install the new lens
1. Insert the lens with the yellow protrusion on top.
HTIGR
TEFL
Yellow Protrusion
2.Rotate the lens clockwise.
Rotate the lens until you feel it click into place.
UP
WNDO
RIGHT
EFTL
