Esoteric P-01 Connection to the D-01(IEEE1394)

Connection to the D-01 (IEEE1394)

		cable coaxial BNC
	cable 1394 IEEE
D-01	IEEE 1394	WORD	WORD
(L)	IEEE 1394	SYNC	SYNC
		OUT	IN
		WORD	WORD
D-01	IEEE 1394
		SYNC	SYNC
(R)	IEEE 1394
		OUT	IN
		WORD	WORD
D-01	IEEE 1394
		SYNC	SYNC
(SUBWOOFER)	IEEE 1394
		OUT	IN
		WORD	WORD
D-01	IEEE 1394
		SYNC	SYNC
(CENTER)	IEEE 1394
		OUT	IN
		WORD	WORD
D-01	IEEE 1394
		SYNC	SYNC
(SURROUND L)	IEEE 1394
		OUT	IN
		WORD
D-01	IEEE 1394
		SYNC
(SURROUND R)
		OUT

Six D-01 units are required in order to play multi-channel SACD layers on Hybrid discs without mixing them down to stereo.

When connecting two D-01 units, connect either IEEE 1394 terminal on the P-01 to the same labeled terminal on the D-01. In addition, connect the remaining IEEE 1394 terminal on the D- 01 to the same labeled terminal on the next D-01.

If you are using six D-01 units, daisy-chain all the remaining units in a similar way (in random order).

For the word sync terminals, connect them as shown (in random order).

When connecting the clock generator G-0s, connect the six WORD CLOCK OUT terminals to the WORD CLOCK IN on each unit, and connect the UNIVERSAL CLOCK OUT on the G-0s to the WORD SYNC IN on the P-01.

Setting of the P-01

OUTPUT button	“IEEE 1394”
WORD button	“IN” (When the G-0s is connected, “Rb IN”)
UP CONVERT button “176.4/192”
Setting of the D-01
INPUT button	“IEEE 1394”
WORD button	One of the D-01 that outputs word
	synchronization signals: “OUT”
	The others: “IN”
	When the G-0s is connected, set all the
	D-01 to “Rb IN”.
W_OUT setting	“176.4”
CH_SEL setting	respective channels

Setting of the G-0s

Frequency change button (A, B or C)	176.4kHz
FREQUENCY MODE button	44.1kHz

10