Manuals / Brands / Home Audio / Speaker / Esoteric / Home Audio / Speaker

Esoteric P-01 Pausing playback, Stopping playback, Opening and closing the tray, Playback

1 32

Download 32 pages, 893.35 Kb

Playback

OPEN/CLOSE PLAY

1Press the OPEN/CLOSE button.

The tray opens after a few seconds (this delay is normal and due to the movement of internal mechanisms within the unit before opening).

3Insert the disc label side up.

<Make sure the disc is located in the center of the recess in the tray in order to avoid any malfunction or jamming of the tray or the unit.

4Press the OPEN/CLOSE button again.

The tray closes. Take care to not pinch your fingers or other objects in the moving tray.

The unit reads the disc (this may take a little time) and the display shows “LOADING”.

5Press the PLAY button to start playback.

Pausing playback

Press the PAUSE button to pause playback. J indicator lights on the display.

Press PLAY or PAUSE to restart playback.

Stopping playback

Press the STOP button.

Opening and closing the tray

Pressing OPEN/CLOSE opens the tray if it is closed, and closes it if it is open.

When the tray is opened during playback, it may take a few seconds before the disc comes to a stop and is “unloaded”. The tray will then open.

19

Contents

Page For U.S.A Contents Features What’s in the box Conventions about This Manual Read this before operation Placement of the unit Beware of condensation Connections Main Unit Power Supply Unit ADigital audio output terminals BDigital audio output terminals (NORMAL) CWord sync input terminal DSIGNAL GND connection EDC IN/OUT connector Connection to the G-0/G-0sand two D-01converters Connection to 6 sets of D-01 Connection to the D-01(IEEE1394) Connection to the D-70 Copyright protection system DTCP Data transfer rate How to connect multiple i.LINK-capabledevices How to insert the batteries Names of Each Control (Main Unit) Front Panel Display Names of Each Control (Remote Control Unit) E F Type of discs that can be played on this system Following discs cannot be played with this unit: POWER switch Digital Output Setting Pausing playback Stopping playback Opening and closing the tray Skipping playback Selecting a track Fast scanning Selecting the playback area Clearing the last track from the list Adding tracks to the list Clearing the whole program Track repeat Disc repeat Programmed repeat Changing the display mode Display dimming Word Sync Up Convert Restoring factory default settings Page 2ch/Multi setting Setting for the DIGITAL OUTPUT (NORMAL) terminal (D-OUTNorm) CD Direct Speaker Size (SP Size) Speaker levels (SP Level) Speaker distance Start the Test Tone (Test Start) Test tone length (Test tone) Troubleshooting Specifications Block Diagram