Settings (Audio Setup)

2ch/Multi setting

When a option marked with “>” is displayed, use the up or down cursor buttons to change the setting, and press the ENTER button to confirm the entry.

2ch*

2-channel audio is output. Multi-channel data is mixed down to stereo.

Select this mode to listen music in stereo when using only two D-01 units or if the P-01 is connected to a two-channel system.

Multi ch

Discrete 5.1-channel audio is output. Select this output mode if you are using six D-01 units or the P-01 is connected to a multi-channel D/A converter with IEEE 1394 cable.

Setting for the DIGITAL OUTPUT (NORMAL) terminal (D-OUT Norm)

When a option marked with “>” is displayed, use the up or down cursor buttons to change the setting, and press the ENTER button to confirm the entry.

ON

Audio is output from the DIGITAL OUTPUT (NORMAL) terminal. Select this when a digital device is connected to this terminal.

OFF *

Audio is not output from the DIGITAL OUTPUT (NORMAL) terminal. If you are not using this terminal, we recommend you turn this OFF for better sound.

<The DIGITAL OUTPUT (NORMAL) terminal cannot output an up converted signal nor the SACD digital data stream.

CD Direct

When a option marked with “>” is displayed, use the up or down cursor buttons to change the setting, and press the ENTER button to confirm the entry.

Direct *

Speaker setting is bypassed. Select this setting for stereo sound.

Normal

Select this to enjoy multi-channel sound using the speaker setting you have selected.

Settings (Speaker Setup 1)

Speaker Size (SP Size)

Select the size (Large* or Small) independently for the L/R (front pair of speakers), the C (center speaker) and the SR/SL (surround pair of speakers). Turn the subwoofer (SW) ON* or OFF (if you have no subwoofer).

Large *

Select this when the connected speakers can fully reproduce low frequency sounds.

Small

Select this when the connected speakers are relatively small and cannot fully reproduce low frequency sounds.

When this setting is selected, bass frequencies are output from the subwoofer (if no subwoofer is connected, from the front speakers).

OFF

Select this when no speaker is connected. The sound is output from the front (or surround) speakers.

<When the front speaker is set to “Small”, the subwoofer is set to “ON” automatically. You cannot set the subwoofer “OFF”.

ON (subwoofer only)

Select this when a subwoofer is connected.

<For the center and surround pair options, if these speakers are not physically present, you can select OFF to prevent any output from those channels (you cannot turn off the front L/R pair). Any speakers turned off will downmix (if this option is selected) to the other enabled channels.

Speaker levels (SP Level)

Use this to set the relative levels of the speakers. You can set the L/R pair together, and the center, and surround rear pair independently, as well as the subwoofer. The maximum value you can set here is +6dB and the minimum is –12dB, with settings made in 0.5dB increments. The default setting is 0dB.

28