Repeat mode

Use the REPEAT button to select the repeat mode for playback. Repeated presses of the REPEAT button cycle between the following options:

REPEAT TRK

 

REPEAT DSC

 

 

 

(repeat the track)

(repeat the whole disc)

REPEAT OFF (no repeat)

<Halting playback stops the repeat mode.

<This feature is not available for all discs.

<The following buttons cancel repeat mode:

STOP, OPEN/CLOSE, POWER.

Track repeat

When this is selected, the currently-selected track repeats. If another track is selected during repeat playback, the newly selected track repeats.

Disc repeat

The whole contents of the disc are repeated.

Programmed repeat

If programmed playback has been set up, the whole program is repeated.

Pushing the REPEAT button cycles between REPEAT PGM (program repeat) and REPEAT OFF (programmed playback takes place).

2 channel/Multi channel

When playback is stopped, use the 2CH/MULTI button to select either 2CH (stereo) or MULTI (multi-channel surround) audio output.

2ch

2-channel audio is output. When multi-channel data on SACD is played back, the data from the center, sub-woofer, right surround and left surround channels is mixed down to stereo (front left and right channels). (The DOWN MIX indicator lights on the display.)

Select this mode to listen music in stereo using two D-01 units.

Multi ch

Discrete 5.1-channel audio is output. Select this output mode if you are using six D-01 units or the P-01 is connected to a multi-channel D/A converter with IEEE 1394 cable.

<The 5.1CH indicator lights when the P-01 is switched to Multi ch.

23