Esoteric P-01 Connection to 6 sets of D-01

Connection to 6 sets of D-01

cable coaxial BNC		cable digital XLR
WORD	WORD	XLR 1				XLR 1	WORD
SYNC	SYNC						SYNC
OUT	IN						OUT
D-01(R)							D-01(SURROUND L)
	WORD	WORD	XLR 1		XLR 1	WORD	WORD
	SYNC	SYNC				SYNC	SYNC
	OUT	IN				OUT	IN
D-01(L)							D-01(SURROUND R)
		WORD	WORD	XLR 1 XLR 1	WORD	WORD
		SYNC	SYNC		SYNC	SYNC
		OUT	IN		OUT	IN
D-01(SUBWOOFER)							D-01(CENTER)

When connecting to two D-01 units, connect the XLR terminals (FRONT L and FRONT R) of the P-01 to the XLR terminal (1 or 2) of each D-01.

When you are using six D-01 units for multi-channel listening, connect their XLR outputs in a similar way.

If the clock generator G-0/G-0s isn’t available, connect the word sync terminals as shown above (in random order).

When connecting the G-0 or G-0s with a P-01 and six D-01 units, connect the WORD CLOCK OUT of the G-0/G-0s to the WORD SYNC IN of each D-01 and connect the UNIVERSAL CLOCK OUT of the G-0/G-0s to the WORD SYNC IN of the P-01.

Setting of the P-01

OUTPUT button	“XLR DUAL”
WORD button	“IN” (When the G-0s is connected, “Rb IN”)
UP CONVERT button “176.4/192”

Setting of the D-01
INPUT button	“XLR 1” or “XLR 2”
WORD button	One of the D-01 that outputs word
	synchronization signals: “OUT”
	The others: “IN”
	When the G-0 is connected, set all the
	D-01s to “IN”.
	When the G-0s is connected, set all the
	D-01s to “Rb IN”.
W_OUT setting	“176.4”
CH_SEL setting	respective channels

Setting of the G-0/G-0s

Frequency change button (A, B or C)	176.4kHz
FREQUENCY MODE button	44.1kHz