Settings (introduction)
1Turn on the main unit.
2Press the SETUP button to enter the setup menu.
“AudioSetup” appears on the front panel display.
<In this manual, factory settings are marked with an asterisk “*”.
<Although it is possible to enter the setup menu while playback is continuing, not all menu functions will be available. Increase the number of available functions by pressing the STOP button.
<Exit the setup menu by pressing SETUP once again.
3Use the cursor buttons to navigate the menus.
<Refer to the Setup Menu Chart on the next page.
<The options you can change are marked with “>”.
<Use the left and up cursor buttons (or the RETURN button) to go back a level in the setup menu.
4When a option marked with “>” is displayed, use the up or down cursor buttons to change the setting, and press the ENTER button to confirm the entry.
<When a numerical value (such as speaker distance) is changed, the value is confirmed without pressing the ENTER button.
<Individual menu functions are described on pages 28 and 29.
<Repeat steps 3 and 4 as required.
5Exit the setup menu by pressing SETUP once more.
Restoring factory default settings
If you have made a lot of changes to the setup, and want to restart from a known set of options, restore the unit to the factory default settings as follows:
Power Supply Unit | Main Unit | ||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
1.If the unit is on, press the POWER switch to turn it off.
2.While holding down the STOP button, press the POWER switch.
All memories are erased, and the unit returns to the factory default settings.
26