Y B 5 5 0 P E O P E R AT I O N M A N U A L
DEFAULT FACTORY SYSTEM SET CODES USED FOR NORTH AMERICA
When shipped from the factory, the radio is set up as follows. Changes can be made via the SYSTEM SET CODE TABLE and the section titled CHANGING SYSTEM SET CODES, on the pre- vious page
•24 hour clock system. Code 24.
•10 KHz AM (MW) tuning rate. Code 10.
•Eight pages with 25 memories (200 memories total). Code 08.
•
•1.5 Volt AA batteries. Code 29.
•Radio alarm uses last station tuned. Code 02.
MONITORING CURRENT SET CODE STATUS
In the set code table shown below, the current status of the set codes identified with an asterisk (*) can be monitored by performing a 3 second press of the ‘Sys. Set’ button. The applicable icon shows briefly in the display window for each code.
SYSTEM SET CODE TABLE
| SHOWN IN | |
CODE NO. | DESCRIPTION | DISPLAY |
|
|
|
01 * | Alarm uses radio station on | AL. 1 |
| Page 1, Mem 1 |
|
|
|
|
02 * | Alarm uses last radio station tuned | AL. 2 |
04 | Divide the memories into 4 pages | P4: 50 |
| with 50 locations |
|
|
|
|
05 | Divide the memories into 5 pages | P5: 40 |
| with 40 locations |
|
08 | Divide the memories into 8 pages | P8: 25 |
| with 25 locations |
|
|
|
|
20 | Divide the memories into 20 pages | P20: 10 |
| with 10 locations |
|
09 * | Set the tuning rating for MW |
|
| to 9KHz 9KHz |
|
|
|
|
10 * | Set the tuning rating for MW |
|
| to 10KHz 10KHz |
|
12 * | Set the clock system to 12Hr 12H |
|
|
|
|
24 * | Set the clock system to 24H 24H |
|
|
|
|
40 | 41 |
