Y B 5 5 0 P E O P E R AT I O N M A N U A L
STORING A FREQUENCY INTO MEMORY
200 frequencies can be stored into 8 pages of memory, each page holding 25 frequencies. Turn on the radio. First, select a memory page by pressing the M.Scan/Page button for about 3 seconds. The memory page then flashes in the upper right corner of the display. Within 5 seconds select the desired page with the +/ – buttons. Once selected, either press/release the M.Scan/Page button or wait about 3 sec- onds, causing the memory page to be entered. Next, tune to the desired radio station, then press/release the Mem./Edit button and note that the ‘PRESET’ digits flash in the upper right corner of the display. Within 5 seconds use the numeric keypad to enter the memory preset number that you wish to store the station into (in the factory default setting, there are 25 presets per page). Punch in a number from 1 to 25. Within 5 seconds press the Mem./Edit button.
ACCESSING WHAT IS STORED INTO MEMORY
Once a page number has been selected or changed, even if it is not seen on the screen, you can access any memory preset on that page by keying in the memory number with the numeric keypad. To change pages, use the procedure described previously. Memory Search enables searching through the memory presets within a memory page. Press/release the M.Scan/Page button, then use quick, short presses on the +/– buttons to search through the memory presets. Using a longer, 3 second press of +/- engages Memory Autoscan, allowing about 5 seconds on each memory before automatically moving on to the next one. To stop mem- ory preset autoscan, press/release one of the +/– buttons.
16 | 17 |
