Eton YB550 operation manual Installing Batteries, Deleting Memories and Memory Pages

Y B 5 5 0 P E O P E R AT I O N M A N U A L

3 DETAILED OWNERS MANUAL

DELETING MEMORIES AND MEMORY PAGES

To delete a frequency stored in a memory, press/release the M.Scan/Page button, then use the +/- buttons to select the memory preset location of the frequency that you wish to delete. Then press/hold the Mem./Edit button for about 2 sec- onds and then release it. ‘dEL’ appears flashing in the display. Within 2 seconds, press/release the Mem./Edit button. To delete all contents of a page, press/release the M.Scan/Page button, then press/hold the Mem./Edit button for 4 seconds and then release it. ‘dEL’ appears flashing in the display. Within 2 seconds, press/release the Mem./Edit button.

LEARNING MORE ABOUT THE YB 550PE

All of the YB 550PE’s capabilities cannot be addressed in this Quick Guide. You can tailor the radio to your own liking with System Set Codes. To do this, see the section titled SYSTEM SET CODE TABLE, pages 41-42.

Note: In the instructions below, numbers in parenthesis ( ), refer to the diagrams and appear only at the first use or description of the item. See the previous section titled DIA-

GRAMS.

INSTALLING BATTERIES

Install 3 AA alkaline batteries into the battery compartment (21), observing the battery polarity diagram on the back of the radio. To remove the battery compartment cover, first remove the STAND (20) by pulling its locking tabs away from the lower sides of the radio and then removing it from the back.

USING RECHARGEABLE BATTERIES: Rechargeable batteries must be charged in their own charger. They will not charge inside the YB 550PE.We suggest nickelmetal-hydride batteries (Ni-MH). Be sure to change the SYSTEM SET CODE accordingly. See the section titled SYSTEM SET CODE TABLE, on pages 41-42.

18 19