a.Go to INPUT NO. selection and turn the joystick Left/Right to select alarm input number from 1 ~4.

b.Type: Select Normal Close (NC), Normal Open (NO), NIGHT NC, NIGHT NO, or OFF for alarm type.

NC: Enable a normal close alarm input.

NO: Enable a normal open alarm input.

NIGHT NC: Set camera at night mode with normal close alarm input. When there is

event triggered, the camera will be changed to day mode.

NIGHT NO: Set camera at night mode with normal open alarm input. When there is event triggered, the camera will be changed to day mode.

OFF: Disable alarm input.

ALARM INPUTS <┘

ALARM OUTPUTS <┘

MOTION DETECT <┘

EXIT

ALARM INPUTS

 

INPUT NO.

1

 

TYPE

NO

 

REACTION

POSITION<┘

1

DURATION

TIMEOUT<┘

5

PRIORITY

1234

 

RETURN

(diagram 3.25)

c. REACTION: The action will be taken when alarm is triggered. OFF: No reaction will be taken when alarm is triggered.

POSITION: When the alarm is triggered, speed dome will go to the preset position. Turn the joystick Left or Right to select on Position and press Enter key to select position number. Turn joystick Left/Right to make selection. It is selectable from 1~192. Press Enter key again to confirm selection.

61

Page 61
Image 61
EverFocus EPTZ3100I user manual 1234