EXP Computer PCMCIA Ethernet Modem Adapter Data Communication, File Transferring, Remote Access

DATA COMMUNICATION

Normal	\N0	\N0	\N0	\N0	\N0
Direct	\N1	\N1	\N1	\N1	\N1
Reliable	\N2	\N2	\N2	\N4	\N2
Auto-Reliable	\N3	\N3	\N3	\N3	\N3 with
					MNP10
V.42 Only	\N4	\N4	\N4	\N4 -J0 AH0	\N4
MNP Only	\N5	\N5	\N5	\N2	\N5

File Transferring

To transfer files between two computers user will need to choose a file transfer protocol once the two modems are connected. There are many different types of file transfer protocol. Each has advantage and disadvantage on their own. The following are some guide - line in file transferring:

CAfter log in to a remote computer check, the protocol its using. Make sure your protocol matches the remote computers. Here are, some names of the popular protocols: COMPUSERVE B, Kermit, XMODEM, YMODEM, ZMODEM.

CThe remote computer will wait for a user to start the file transfer sequence. The user must tell the communication software to start sending or receiving the selected files.

Remote Access

The best source of the information for setting up a remote access software is its User=s manual. A user needs to fill in which type of modem to use (consult the modem choice section) and the flow control selection.

If you are having some difficulty connecting to a remote computer, change the init string for the modem to use Normal or Direct Mode. Some of the remote access programs have an error correction and/or data compression built-in to the software. Disabling Fax/Data Modem=s errorcorrection and/or data compression may be required for this operation.

CELLULAR OPERATION

For the >Cellular ready= modem owner, you will need to obtain a proper cellular interface cable kit that matches the make and model your cellular phone.(see the Notice: below)

Please follow these suggestions:

CVerify if the modem is installed and recoqnized by the system. Using PCMCIA sockets driver utility such as Cardinfo or PCMWIN etc.

CCheck the modem operation with the land line using any communication program for DOS or Windows.

CYou need to run an installation program to activate the cellular function included with the cellular interface kit. For more details consult the User=s manual and the README file in the driver diskette.

For the >None - Cellular ready= Fax/Data Modem, you will need a cellular interface adapter. This adapter provide Dial Tone for the modem and cellular cable kit matching your cellular phone make and model.

Operating consideration:

- 15 -