FAX OPERATIONFAX OPERATION- 16 -C Because of the cellular phone environment, modem=s connection speed may be slower than the actual rated. (9600 bps is the fastest)
C The MNP 10 protocol (cellular enhancement) is included with the 28,800 and all the cellular-ready modem.
Notice: For the Cellular Ready Modem only
This product contains inactivated SPECTRUM CONNECTED cellular data
communication technology which can be activated for data communication over a cellular
net work when a license is obtained from SPECTRUM and the product is combined with
an appropriate cellular telephone driver and corresponding cable compatible with popular
brands of cellular telephones. To obtain a license and to determine the availability of an
appropriate driver and cable for cellular telephone, contact Spectrum Information
Technologies, Inc. by calling 800-233-2119
This product is licensed under one or more of the following United Stats patents:
RE 34 034; 4,9972,457; 5,127,041; and 5,249,218 of Spectrum Information
Technologies, Inc. Other patent pending
FAX OPERATION
The Fax/Data Modems support Group III Class 1(EIA/TIA 578) or Class 2 commands, which are part of the AT command set. The fax software included with your modem will automatically handle the fax
operation for you. Please refer to the manual of your fax software on how to send and receive faxes from your computer with the Fax/Data modems. If you are using fax software other than the one included,
the installation of the software may ask you to specify the type of fax modem. You may select either Class 1 or Class 2 type fax. Consult the list below for your specific modem speed.
Your modem speed Select Fax Class
2400, 9600, 14,400 Class 1, Class 2 or Hayes V series (14,400 use Hayes Optima 14,400 + Fax)
14,400CL Class 1 or Hayes Optima 14,400 + Fax
28,800 Class 1, Class 2 or Hayes Optima
Flow Control CTS/RTS or Hardware is recommended
The Fax/Data Modems with the UART 16550 ( 2400, 9600 and 14,400/14,400) emulation may have problems sending faxes under the Microsoft Windows. The following lines additions and/or changes in the
SYSTEM.INI file will correct the problem.
SYSTEM.INI