VN-Matrix 300 • System Conguration 29
Device Page
Select a device from the device list:
zDouble click the mouse pointer on any of the entries for a device in the list (see
figure 15).
The Device page of the chosen unit will be displayed. The example below shows the
Device page for an encoder.
Figure 16. Device Page is Divided into Four Information Areas

Device Summary (a)

zDevice Name — The name of the device may be changed to a User specic value. This
is the name of the device itself.
zSerial Number of the unit — For information only, required when upgrading the licence
on a device.
zIP address: port — This field shows two pieces of information:
zThe IP address of the Media 1 ETHERNET interface.
zThe port number that has been congured for send and receive of UDP control
information.
zBy default these are 9001 (send), 5432 (receive).
zLink Status — The condition of the ETHERNET network link to the controller.

Licensed Features (b)

zThis field provides a description of features that are enabled on the device.
zThe licence management button provides access the License page where additional
features may be enabled.