VN-Matrix 300 • System Conguration 31
Create Display (Decoder)
Select this option to create a Display (Decoder).
zDisplay will be shown adjacent to a change device type button.
zA display icon will be created in the Configuration window.
Figure 18. Source (Decoder) Configuration and Setup
The Device Setup area provides access the following controls and information.
zMode:
z Enable — Normal operation; image transport is enabled.
z Disable — Image transport is disabled; the local display will show a blank screen.
z Standby — Same as disable, the display will show a splash screen.
zIdentify — When checked, causes the name of the device to be overlaid on the
decoded image output.
zSource Identify — When checked causes the name of the current source (stream) to be
overlaid on the decoded image output. This value is displayed in brackets immediately
after the device name.
zData Interface — The selection defines which of the two network interfaces is to be
used for the data transport.
zMulticast TTL — This value sets the Time To Live (TTL) for multicast packets.

Configuration

zProvides access to the device configuration pages.
z Select an icon to access the configuration pages.