Manuals / Extron electronic / Computer Equipment / Network Card

Extron electronic 42-122-xx manual Checklist for contents of box, AVTrac Kit Contents

Models: 42-122-xx

1 28

Download 28 pages 37.48 Kb

Page 4

Image 4

Kit Contents

Box 1

The AVTrac Kit is shipped in two boxes.

•Box 1 contains the track and ramp components.

•Box 2 contains the connectivity box, the conduit and accessory components.

Check the contents of each box to ensure all items are present.

Side Ramp (2)	Rubber Strip (1)
	Rubber Strip (1)
	(only with #42-122-xxmodels)

Plastic Template (1)

Aluminum	Aluminum
Cover Track (1)	Base Track (1)

Checklist for contents of box 1

8' (2.44 m) aluminum base track (1) 7' 2" (2.18 m) aluminum cover track (1) 8' (2.44 m) side ramps (2)

8' (2.44 m) rubber strip (1) — #42-122-xxmodels only Plastic wall base trim template (1)

2AVTrac • Kit Contents

Page 4

Image 4

Contents

Installation Guide Connectivity for A/V, Data, and PowerAVTrac International/Universal ModelsPrecautions Safety Instructions EnglishConsignes de Sécurité Français Sicherheitsanleitungen DeutschWheelchair Accessible IntroductionOverview AVTrac Floor SystemKit Contents Check the contents of each box to ensure all items are presentChecklist for contents of box 2 AVTrac Kit ContentsAVTrac Kit Contents Kit ContentsCheck the contents of each box to ensure all items are present Checklist for contents of boxBefore Getting Started PlanningFloor Considerations In-Wall Cable Routing ConsiderationsWheelchair Accessibility Room ConsiderationsThe AVTrac maximum slope is AVTrac Before Getting StartedTools and Equipment Required for Installation Before Getting Started, cont’dTools Equipment/otherInstallation AVTrac InstallationStep 1 Floor New ConstructionCut cable access hole in wall 8 AVTrac InstallationStep 2 Wall Mark wallStep 3 Track Cut aluminum base trackMeasure and cut track Installation10 AVTrac Installation Step 3 Track, cont’dPre-drill holes in track and ramps Positions of mounting holesMate side ramp to base track Drill into concrete and screw down trackScrew side ramps to floor AVTrac Installation12 AVTrac Installation Step 4 Connectivity BoxSecure connectivity box to the floor InstallationStep 5 Power Module Connect wires to AC receptacleInstallation AVTrac InstallationStep 5 Power Module cont’d Attach AC power module14 AVTrac Installation Connect double isolated cable to junction boxInstall AAPs Step 6 AAPsRun cable to AAPs InstallationStep 7 Finishing Up Ensure cables lay flatFit cover track Cut carpetRefit carpet Use template to cut base board Reattach base board to wallAttach carpet tile to track raceway AVTrac InstallationAVTrac installed 18 AVTrac InstallationStep 7 Finishing up cont’d InstallationSpecifications Reference MaterialAVTrac Reference Material Generalcont’d 20 AVTrac Reference MaterialReference Material AVTrac 480CConnectivity box AVTrac Reference MaterialTOP VIEW SIDE VIEWUniversal AC Compatibility Guide 22 AVTrac Reference MaterialReference Material cont’dOptional Accessories Track AccessoriesAccessory Active AAPsReference Material 24 AVTrac Reference Materialcont’d USA, Canada, South America Europe, Africa, and the Middle Eastand Central America AsiaQuick Installation Checklist Step 2 - Install TrackStep 3 - Install Connectivity Box Step 4 - Install AC Power Module