Connectivity Box | Extron electronic 42-122-xx guide

Installation

Step 4: Connectivity Box

By this point, the base track, side ramps and end ramps must be securely fastened to the floor. To attach the connectivity box to the base track, follow these instructions:

4-1Reposition the connectivity box, in the correct orientation, over the pre-drilled holes in the base track (see instruction 3-3).

The end of the connectivity box that has three mounting holes faces back towards the track.

Using at least three of the provided 3/16" masonry screws, secure the box to the track and floor.

Remove all dust with a vacuum cleaner.

The end of the connectivity box with three mounting holes faces back towards the track.

Masonry

Screws

Secure connectivity box to the floor

12AVTrac • Installation

Page 14

Image 14

Extron electronic 42-122-xx manual Connectivity Box, Secure connectivity box to the floor

Contents

Installation Guide AVTrac Consignes de Sécurité Français PrecautionsSafety Instructions English Sicherheitsanleitungen Deutsch AVTrac Floor System IntroductionOverview Kit Contents Kit Contents Floor Considerations Before Getting StartedPlanning In-Wall Cable Routing Considerations AVTrac maximum slope is Wheelchair AccessibilityRoom Considerations Tools and Equipment Required for Installation Before Getting Started, cont’d Remove carpet tiles to expose concrete InstallationFloor Cut prelaid carpet roll to expose concrete Mark wall Cut cable access hole in wallWall Measure and cut track TrackCut aluminum base track Positions of mounting holes Track, cont’dPre-drill holes in track and ramps Pre-drill holes to secure connectivity box Screw side ramps to floor Mate side ramp to base trackDrill into concrete and screw down track Connectivity Box Secure connectivity box to the floor Power Module Connect wires to AC receptacle Connect double isolated cable to junction box Power Module cont’dAttach AC power module Connect AC conduit to junction box Run cable to AAPs Install AAPsAAPs Fit cover track Finishing UpEnsure cables lay flat Cut carpet Attach carpet tile to track raceway Refit carpetUse template to cut base board Reattach base board to wall AVTrac installed Finishing up cont’d Specifications Reference Material Cont’d AVTrac 480R Connectivity box Universal AC Compatibility Guide USA Active AAPs Optional AccessoriesTrack Accessories Passive AAPs Reference Material Extron’s Warranty Quick Installation Checklist Before Getting Started