Installation, cont’d
5. | Snugly tighten the Philips head screws on the screw | |
| clamps to secure the enclosure to the surface. | |
|
| Overtightening the Philips head screws on the screw |
| CAUTION | |
|
| clamps can bend the clamp’s horizontal flange. |
6. | Tighten the locking thumbscrews on the screw clamps to | |
| lock the clamp in position. | |
7. | Peel any remaining protective coating from the enclosure. |
Underside Features and Cabling Connections
Figure
|
| NORMAL MEDIUM | MAXIMUM |
|
|
|
| unity gain peaking & gain | peaking & gain POWER |
|
|
AUDIO |
|
|
| ||
|
|
|
| ||
R R | L | L |
|
|
|
|
|
|
|
| 4 |
|
|
|
|
| 1 * |
|
| 8 |
| Back View | |
2 * |
|
|
|
| |
| 11 | ● | * HSA 200 Models Only | ||
| ● | ||||
|
| 9 | ● | HSA 200CE/HSA 200SE | |
|
| 13 | |||
|
|
|
|
| Units Only |
● | ● |
10 | 12 |
7 |
|
| 5 |
| Bottom View |
6A 6B
Figure 2-5 — HSA 200CE under-table features
All HSA 200 models only
1AC power outlet — Use this AC connector to:
•Plug in an external power supply to power the Extender board on the HSA 200CE or HSA 200SE.
•Provide AC power (5 amps max.) for loop through to one additional HSA 200 unit.
•Plug in a projector or other display device.
This outlet is a
2RGBHV video output — Connect the BNC cable from the projector, plasma screen, or other display device to these female BNC connectors.
HSA 200C and HSA 200S (no Extender board) — The output from these connectors is an unbuffered
HSA 200CE and HSA 200SE (Extender board) — The output on these connectors is buffered by the Extender board.
HSA 200C and HSA 200S (no Extender board) only
On HSA 200 models with no Extender board, the audio connection is part of the pigtail (figure
3 | ✝ | ✝ HSA 200S/HSA 200C | |
(no Extender board) units only | |||
|
Figure 2-6 — HSA 200S and HSA 200C audio connector
3Audio output connection — This
Unbalanced Output
Tip (L) | L R | Audio |
Tip (R) | ||
Sleeve/Ground |
|
|
Figure 2-7 — Unbuffered, unbalanced audio connector wiring
HSA 200/222 Series • Installation | HSA 200/222 Series • Installation |