Extron electronic HSA 200SE Front Panel Connectors, Installation, cont’d, Power connector wiring

Installation, cont’d

Power connector wiring

1. See figure 2-10. Plug the input connector of the included 100-240 VAC, 50/60Hz, 12 VDC power supply into the AC power outlet on the underside of the enclosure ( 1 on figure 2-5).

			NORMAL	MEDIUM	MAXIMUM
			unity gain	peaking & gain peaking & gain POWER
	AUDIO				9-18 VDC
R	R	L	L

	Power Supply
Back View

Figure 2-10 — Powering the Extender board

This outlet is a US-style power outlet on both the US/ domestic and international HSA 200 models. The power output is the same voltage and frequency as the power input and is an acceptable power input to the power supply included with the HSA.

2.	Insert the external power supply (included) output wires
	into the 2-pole direct insertion captive screw terminal on
	the Extender board (figure 2-11) and secure the wires.

Do not tin the stripped power supply leads. Tinned wires are not as secure in the captive screw terminals and could pull out.

The two power cord wires must be kept separate while the power supply is plugged in. Remove power before continuing.

To verify the polarity before connection, plug in the power supply with no load and check the output with a voltmeter.

Front Panel Connectors

Figure 2-12 shows the front panel of the HSA 200 models. Figure 2-13 shows the front panel of the HSA 222.

2 3

HSA 200

●

4

1	5A	5B	● HSA 200CE and
			HSA 200SE Models Only
Figure 2-12 — HSA 200 front panel connectors
125V 50/60 Hz 5A		HSA 222	125V 50/60 Hz 5A

CAUTION

Black Wire

When connecting the power supply wires, voltage polarity is extremely important. Applying power with incorrect voltage polarity could damage the power supply and the Extender board in the HSA.

White Wire

12V

+

-

Captive Screw

Terminal

CAT6

1 5A 5B 1

Figure 2-13 — HSA 222 front panel connectors

Figure 2-11 — Power connector wiring

1AC power outlet(s) — Plug a standard power cord into this connector to provide AC power (5 amps max.) for a laptop or other device. The power output will be the same voltage and frequency as power input. The power outlet(s) will be

appropriate to the model.

2-12 HSA 200/222 Series • Installation HSA 200/222 Series • Installation 2-13