Extron electronic IPL T PC1i setup guide IPL T PC1 Table of Contents, Chapter One Introduction

	Table of Contents
	Chapter One • Introduction	1-1
	About this Manual	1-2
	About the IPL T PC1	1-2
	About Global Configurator	1-3
	System requirements	1-4
	Installing Global Configurator	1-4
	Downloading and installing from the Extron Web site 1-4
	Installing from CD-ROM — Autorun enabled	1-5
	Installing from CD-ROM — Autorun not enabled	1-5
	Chapter Two • Hardware Setup	2-1
	Front Panel	2-2
	Rear Panel	2-3
	Connecting the Hardware	2-4
	Wiring the Local Area Network (LAN) port	2-5
	RS-232 port cabling	2-6
	Accessing the Communication Sheet	2-6
	Connecting to the display device	2-7
This page was intentionally left blank.	Wiring for IR control	2-8
	Wiring the contact Input port	2-8
	Chapter Three • Software Setup	3-1
	Creating a Global Configurator Project File	3-2
	Step One: Download device drivers.	3-2
	Step Two: Create a new project.	3-4
	Step Three: Add a device.	3-6
	Step Four: Define the location of the new device.	3-8
	Step Five: Save the new Global Configurator file.	3-9
	Step Six: Enter contacts.	3-10
	Step Seven: Create e-mail messages.	3-11
	Step Eight: Enter output receptacle and contact input
	port labels.	3-12
	Step Nine: Assign device drivers.	3-13
	Assigning a serial driver	3-13
	Assigning an IR driver	3-14
	Step Ten: Set scheduled actions and e-mail deliveries.	3-16
	Selecting an action	3-16
	Scheduling e-mail delivery	3-18
	Step Eleven: Set monitored conditions.	3-20

IPL T PC1 • Table of Contents