Introduction
This guide describes the function, installation and operation of the Extron MSW 4V rs and MSW 4SV rs mini video switchers. Unless otherwise stated, the terms “MSW” and “switcher” refer to both models.
About the MSW 4V rs and MSW 4SV rs Switchers
The Extron MSW 4V rs and MSW 4SV rs are
The MSW 4V rs switches between a maximum of four NTSC, PAL, or SECAM composite video inputs on female BNC connectors and produces two identical video outputs
on female BNC connectors (see figure 1 on page 2). The video output is a buffered, composite signal.
The MSW 4SV rs switches four
•One
•One composite video output on a female BNC connector
These mini video switchers can be operated from the front panel or via a contact closure device connected to the rear panel, such as an Extron CCR 204
They also feature a front panel selectable auto switch mode that automatically switches to the highest numbered input that has an active sync pulse present.
Features
Inputs
Outputs — one BNC and one
Video Mute — the video output can be muted using front panel controls Serial control — through an
Video compatibility — with NTSC, PAL, and SECAM video formats
Ability to detect an active signal
MSW 4V rs and MSW 4SV rs • Introduction | 1 |
