Extron electronic MSW 4V rs manual Mode Selection, Output Video Mute, Vertical Interval Switching

Mode Selection

The default method for changing channels is Normal mode (using front panel buttons). To activate auto switch mode:

1.Press and hold the Mode (Input 1) and Auto (Input 3) buttons simultaneously.

2.Release the Mode and Auto buttons simultaneously. The Auto Switch LED turns on, indicating that auto switch is enabled.

AUTO	MODE	NORMAL	AUTO
	1	2	3	4
SWITCH

A/V SWITCHER

Figure 7. Turning on Auto Switch Mode

To turn auto switch mode off (Normal mode):

1.Press and hold the Mode (Input 1) and Normal (Input 2) buttons simultaneously.

2.Release the Mode and Normal buttons simultaneously. The Auto Switch LED is unlit and the MSW switches to the previously selected input

AUTO	MODE	NORMAL	AUTO
	1	2	3	4
SWITCH

A/V SWITCHER

Figure 8. Turning off Auto Switch Mode

Output (Video) Mute

Video mute suppresses video signals being sent to either output.

1.Press and hold the Mode (Input 1) and Input 4 buttons simultaneously.

2.Release both buttons simultaneously. The output (video) signal is muted.

To restore the video signal, press the same buttons:

1.Press and hold the Mode (Input 1) and Input 4 buttons simultaneously.

2.Release both buttons simultaneously. The output (video) signal is restored.

Vertical Interval Switching

The MSWs switch inputs during the vertical interval of the video signal that is on input 1. In a genlocked system, switching to any input is glitch-free if one of the genlocked devices is connected to input 1.

MSW 4V rs and MSW 4SV rs • Panel Features 8