Extron electronic user manual Tabletop use, Rack mounting, RAC 104 Installation and Operation

Tabletop use

Four self-adhesive rubber feet are included with the RAC 104. For tabletop use, attach one foot at each corner of the bottom side of the unit and place the unit in the desired location.

Rack mounting

For optional rack mounting, do not install the rubber feet. Mount the RAC 104 on an RSF 123 VersaTools™ 19" 1U rack shelf (Extron part #60-190-20) or a RSU 129 universal 1U rack shelf

(Extron part #60-190-01). On the Universal rack shelf, the unit mounts in one of four locations to the rear of the rack or in one of four locations to the front of the rack.

1.	Remove rubber feet if they were previously installed on
	the bottom of the RAC 104.
2.	Mount the unit on the rack shelf, using two 4-40 x 3/16"
	screws in opposite (diagonal) corners to secure the unit to
	the shelf.

3.Install blank panel(s) or other unit(s) on the rack shelf.

4.Attach the rack shelf to the rack using the supplied bolts.

A

AUDIO

1

B CO

NTROLS

2

4

ADJUSTM

3

Vol. ENTS

VOLUME

eble

TBrass

&TO

NE C

ONTROLLER

A

AUDIO

C

ONTROLS

1U Rack Shelf

1

B

2

VOLUME

TBraesbsle

4

ADJUSTM

3

Vol. ENTS

&TO

NE C

ONTROLLER

1/4 Rack Width False Front

Face Plate

A

AUDIO

C

ONTROLS

Use 2 mounting holes on

1

B

2

VOLUME &TOTreasbsle

3

ADJUSTM

4

ENTS

Vol.B

opposite corners.

NE CO

NTRO

LLER

(2) 4-40 x 3/16" Screws

Mounting the RAC 104 on a VersaTools rack shelf

Only products in the VersaTools line can be mounted on a VersaTools shelf. Most 1U rack-mountable Extron products can be mounted on the standard shelf.

RAC 104 • Installation and Operation 2-3