Extron electronic SW8 VGA Ars, SW12 VGA ARS manual IR 102 remote control connection

Installation and Operation, cont’d

IR 102 remote control connection

The SW8/12 VGA Ars switcher can be controlled via its RS-232 port and an infrared signal. The IR 102 Remote Control Kit (part #70-224-01) is required.

To connect an IR 102 Receiver to an SW8/12 VGA Ars switcher:

1.

2.

100-240V 50/60Hz

I

N

P

U

T

S

1.2A MAX

Connect a 9-pin serial cable, with only conductors 2, 3, and 5 connected, to the RS-232 output port on the IR 102 receiver.

Connect the serial cable to the RS-232 port on the switcher’s rear panel.

SW12 VGA Ars Switcher

						T				Power
1	3	5	7	9	11	O	1		SW12 Ars
						U				Supply
						T		FIXED	VARIABLE
2	4	6	8	10	12	P	2	L R	L RRS-232
						U

S

			6.5' Cable
		6' Cable
			IR-102
IR 102	+10		IR 102 Remote
IR 102 Remote Control		IR Detector	Control Receiver

RS-232

Control

Figure 2-16 — A typical switcher application w/IR 102 remote control

2-12 SW8/12 VGA Ars • Installation and Operation