Extron’s firmware loader screen | Extron electronic SW12 VGA ARS

9. On the Choose Firmware File window, double-click on the new firmware file to open it. The Choose Firmware File window closes, and the path to the selected firmware file is displayed in the “Select a firmware file” field on the firmware file selection screen.

Figure 3-7 — Extron’s firmware loader screen

10. Click the Upload button. A status bar, which shows the progress of the upload, appears in the Firmware Loader window. The firmware upload to the switcher may take several minutes. Once the status bar has progressed fully from left to right, the firmware loader utility resets the switcher.

In addition, messages appear on the firmware file selection window indicating when the unit is uploading the firmware, then resetting itself.

When the firmware upload process is completed, the message “Transfer Complete!” is displayed, and the new firmware version number appears in the Current Unit Information field.

11. Click Exit to close the Firmware Loader.

SW8/12 VGA Ars • Control 3-9

Image 34

Extron electronic SW12 VGA ARS, SW8 VGA Ars manual Extron’s firmware loader screen

Contents

Computer Video and Audio Switchers SW8/12 VGA Ars Consignes de Sécurité Français PrecautionsSafety Instructions English Sicherheitsanleitungen Deutsch FCC Class a Notice Quick Start SW8/12 VGA Ars SW8/12 VGA Ars Quick Start QS-1 Quick Start SW8/12 VGA Ars, cont’d QS-2 SW8/12 VGA Ars Quick Start Table of Contents Table of Contents, cont’d One About This Manual About the SW8/12 VGA Ars SwitchersIntroduction SW8/12 VGA Ars Introduction Features Introduction, cont’d Two Desktop placement Installation and OperationMounting the SW8/12 VGA Ars Switcher Rack mounting Mounting instructions Rack mount an SW8/12 VGA Ars unit as follows Installation and Operation, cont’d Mounting under a desktop Mounting through a desktop Cut an appropriately sized hole in the desktop Rear Panel UXGA, QXGA, or Hdtv Cable Connections Power connectionComputer video input connections Audio input connections Pin Name Connection 5mm Stereo ConnectorVideo output connections Remote control connection Audio output connections 10 SW8/12 VGA Ars Installation and Operation VSW I AAP connection 15 a typical switcher application w/VSW I AAP units IR 102 remote control connection 12 SW8/12 VGA Ars Installation and Operation Front Panel Hold Press Description and Result Operating the SW8/12 VGA Ars Switchers 14 SW8/12 VGA Ars Installation and Operation Three Pin RS-232 Description RS-232 Control Port Connector Remote Control via Simple Instruction Set SIS\⤀Switcher-initiated unsolicited\⤀ messages Control Using the command/response table Error responsesTimeout Symbol definitions Command/Response Table for SIS commands Command Ascii Telnet Response Additional description Upload firmware Updating Firmware Downloading the firmware Loading the firmware to the switcher \Program Files\Extron\FWLoader Extron firmware loader screen Extron’s firmware loader screen 10 SW8/12 VGA Ars Control Specifications, Part Numbers, Accessories Specifications Specifications, Part Numbers, AccessoriesSW8/12 VGA Ars Specifications, Part Numbers, Accessories Audio input Accessories Part Numbers and AccessoriesSW8/12 VGA Ars switchers Included parts Extron’s Warranty Extron Electronics, Europe Beeldschermweg 6C