Extron electronic SW6 CV MX Two, Installation, Introduction, cont’d, Auto models, All models

Introduction, cont’d

Auto models

Auto-sync detect — Auto or AS models continuously monitor all inputs and automatically switch to the highest- numbered input with video sync pulses present. If video is absent from all inputs, no input is selected. The auto version can operate in either normal (manual switch) or auto-switch mode.

All models

Front panel control — The operator can select the input and set the audio gain and attenuation for each input using the front panel buttons.

RS-232 control — The operator can control the switcher from a remote computer or other host using an

RS-232 link on the Remote port. RS-232 control uses Extron’s Simple Instruction Set™ (SIS™) or the Windows- based control software.

Simple Instruction Set — The Simple Instruction Set program lets a host computer control the switcher with simple commands.

Windows control software — Extron’s Windows-based control software provides a graphic way to set up and control the switcher with an on-screen control panel.

Contact closure — The operator can control the switcher remotely using a contact closure keypad connected to the Remote port.

Optional infrared remote control — The operator can also control the switcher using Extron’s IR 20 Universal SYS 4/8/10/AV remote control accessory (part #70-036-03) connected to the Remote port.

Rack mount option — The switchers are 1U high and a half- rack width wide. They can be installed on a standard rack shelf using an Extron 1U Shelf Rack, part # 60-190-01.

Auto-switching power supply — An internal power supply with an IEC connector makes power cord connection easy. The power supply can be used internationally with any power input from 110 VAC to 240 VAC at 50 or 60 Hz and adapts automatically to the input type.

Audio/Video Switchers

Chapter2Two

Installation

Installation Overview

Mounting the switcher

Rear Panel Cabling

Audio/Video Switchers • Introduction