4.Swing the lever arm out until it is perpendicular to the front of the drive caddy (as shown in the figure to the right). Use the arm to pull the caddy out of the drive bay.
5.Remove the drive. There are no screws to be removed or cable connections to be undone.
6.Insert the new drive into the drive bay.
7.Push the caddy back into the recorder.
8.Swing the lever arm back until it clicks into place behind the catch.
ATTENTION: Do not power on the unit at this time.
Configuring the New Drive
1.Attach a mouse to the rear panel PS/2 mouse port (E) and a keyboard to the rear panel PS/2 keyboard port
(F). Alternatively, you may connect the mouse and keyboard to the front panel USB ports (C in the figure on page 15) or the rear panel USB ports (D).
2.Connect a VGA monitor to the rear panel port (G).
3.Power on the recorder by pressing the front panel power switch (A in figure 14 on page 15).
4.Power on the monitor. The login screen is displayed.
5.Enter the Username and Password.
NOTE: By default, the Username is matrix_rec and the Password is matrix.
ed
fd g
6.From the menu bar on the desktop, select
Applications > Internet > Firefox Web Browser.
VNR 100 • Replacing the VNR 100 Drives 16
