Extron electronic VNR 100 manual Reference Information, Default Factory Settings

Reference

Information

This section provides information about:

•Default Factory Settings

•VN-Matrix Port Usage

•Included Parts

•Mounting the VNR 100

Default Factory Settings

Network settings (ETH0)	IP address	192.168.254.254
	Subnet mask	255.255.255.0
	Gateway address	192.168.254.253
Controller	IP address	192.168.254.254
	Port	5432
Configuration	User name	config
	Password	config

VN-Matrix System Port Usage

The VN-Matrix system uses a variety of network port numbers for streaming and inter- communication functions. Just as the universal “telnet” function typically uses TCP port number 23, VN-Matrix uses specific port numbers for its operation.

The table on the following page lists the port numbers used by the VN-Matrix series products. The port numbers are, in most cases, for the sender. Port numbers used for receiving are less important in regards to security.

When configuring a network, make sure it allows traffic on the ports required for your given application. The ports highlighted in yellow accommodate most simple applications.

VNR 100 • Reference Information 20