Extron electronic manual VNR 100 Drives, Application Diagram, Network

The VNR 100 recorder is fully compatible with existing VNM Matrix products, including the:

•Extron 5-channel VN-Matrix recorder

•Extron VN-Matrix 2xx and 3xx codecs

•Extron VN-Matrix software decoder

•Extron VN-Matrix Enterprise Controller

•Extron VNS 104 Multi-Stream decoding software

VNR 100 Drives

The VNR 100 has two replaceable drives:

•Operating system (OS) drive —­ the OS drive contains the VNR 100 operating system.

•Media drive — the media drive contains the video, audio, data, and whiteboard information files that have been recorded by the VNR 100.

Both these drives can be replaced easily. Replacing the media drive does not require any device specific data to be updated on the OS drive. For complete instructions on replacing the drives, see OS Drive Replacement Kit (page 15) and Media Drive Replacement Kit (page 18).

Application Diagram

TouchLink™ Touchpanel
External User Control
	VN-Matrix
	VNR 100
	Recorder
Browser Based User	VNR 100 Recorder
Control
Network	VNR 100
Multicast Enabled	VN-Matrix
	Recorder
Network	VNR 100 Recorder
VNM Enterprise Controller
LAN-1	LAN-1
LAN-2	LAN-2
STATUS	STATUS
VN-MATRIX 225 SERIES	VN-MATRIX 225 SERIES
RGB/DVI OVER IP	RGB/DVI OVER IP
LAN-1	LAN-1
LAN-2	LAN-2
STATUS	STATUS
VN-MATRIX 225 SERIES	VN-MATRIX 225 SERIES
RGB/DVI OVER IP	RGB/DVI OVER IP

LAN-1	LAN-1
LAN-2	LAN-2
STATUS	STATUS
VN-MATRIX 225 SERIES	VN-MATRIX 225 SERIES
RGB/DVI OVER IP	RGB/DVI OVER IP
Multiple VNM 200 and 225 Series Encoders	Multiple VNM 200 and 225 Series Decoders
(or CODECs configured as encoders)	(or CODECs configured as decoders)

Figure 1. Example of a System using the Extron VNR 100

VNR 100 • Introduction 2