Panels and Cabling
This section provides information on:
•Rear Panel Features
•Front Panel Cover
•Front Panel Features
Rear Panel Features
b d
a | c d e f g h |
Figure 5. VNR 100 Rear Panel
AAC power connector — use a standard IEC power cord to connect the recorder to a 100 to 240 VAC, 50 or 60 Hz power source.
BPS/2 port for mouse (optional) — connect a PS/2 mouse to this port, if required.
CPS/2 port for computer keyboard (optional) — connect a PS/2 keyboard to this port, if required.
DUSB ports (2) — used to connect a mouse and keyboard for the initial configuration. There are a total of four USB inputs: two rear panel and two front panel.
E
FVGA output connector — connect a local VGA monitor to this output.
GEthernet port 0 (eth0) — use an
HEthernet port 1 (eth1) — is not functional. Do not connect this port to a network.
VNR 100 • Panels and Cabling | 8 |